Fault: Film does not unwind / film tear

Viewing version 1 of 1 · created Oct 23, 2026, 2:43 PM by Daniel Whitmore

Status
Processed
Source Type
Manual import
Creator
Daniel Whitmore
daniel.whitmore@demo.edmundai.com
Event DateApr 8, 2026, 5:30 PM
Created AtOct 23, 2026, 2:43 PM

Description

Fault description The machine reported a film-related fault. Inspection of the film carriage found a loose sensor bracket and a broken cable. This caused an incorrect or missing sensor signal for film tension or pulses.

Solution

Maintenance journal entry – Strema 5997 wrapping machine (film carriage) 🛠️ Intervention date: 2026-04-08 Equipment: Strema SAD16B wrapping machine, machine no. 5997 Machine location: Film carriage (ASi Slave 16B – film sensors). Source Cause The sensor bracket loosened under vibration or impact, placing excessive strain on the cable until it broke at the sensor. Work performed Secured the machine against unexpected movement and accessed the film carriage. 🔒 Identified the damaged sensor and cable at the loose bracket. Replaced the sensor. Sensor used: IFM IFS204 / IFB3004BBPKG/M/US, part no. 16110 (flush inductive M12, 10–36 VDC). Source Reattached and tightened the sensor bracket, securing it against loosening. Checked the cable, M12 connector, routing and strain relief. Functional test: Checked the input response and completed a wrapping test cycle. The machine operated correctly. Outcome The fault was resolved and the equipment ran without errors. Recommendations For future film faults, check bracket tightness, cable condition and strain relief at the film carriage. Use thread-locking compound or spring washers where appropriate. Material used 1 sensor: IFM IFS204 (IFB3004BBPKG/M/US), part no. 16110. Source The entry can also be formatted as an SAP record with a short text, long text, cause and corrective actions.

Files

NameFile extensionCreated At
image.png
png

10/23/2026 2:43 PM

Showing 1 - 1 of 1

Per page

Version history

1 version

  1. Version 1In use

    Fault: Film does not unwind / film tear

    Oct 23, 2026 · Daniel Whitmore